Researchers develop sensors to test concrete strength in real time

December 22, 2020

How long it takes to construct a building depends, in large part, on when the concrete of each floor is strong enough to take on loads. Engineers at Purdue University[1], a public research institution in West Lafayette, Ind., have developed sensors that could safely speed up a construction timeline by determining concrete strength onsite in real time.

Typically, concrete mix designs require testing before implementation in a construction project. Once those mixes have been vetted for use, the mix design cannot be altered without additional offsite testing. The technology designed by Purdue engineers would remove the need for extensive offsite testing by allowing construction contractors to verify the concrete’s maturity onsite.

“Our sensors could help make better data-driven decisions to determine the construction schedule and improve the quality of concrete construction,” said Luna Lu, Purdue’s American Concrete Pavement Association (ACPA) professor of Civil Engineering.

The Purdue team is working with F.A. Wilhelm Construction Co. Inc.[2] to test and compare the technology with traditional commercial sensors installed into a floor of what will be Purdue’s five-storyy Engineering and Polytechnic Gateway Complex.

Purdue University (West Lafayette, Indiana) engineers have developed sensors that can instantly measure concrete strength, thereby speeding up a construction timeline. Photo courtesy Purdue University photo/Rebecca McElhoe[3]
Purdue University (West Lafayette, Indiana) engineers have developed sensors that can instantly measure concrete strength, thereby speeding up a construction timeline.
Photo courtesy Purdue University photo/Rebecca McElhoe

Lu and her research team also are testing the sensors in highways across Indiana[4] as part of an effort to better determine when concrete is ready to take on heavy truck traffic.

“We are trying to work with contractors to find out how much saving we can do for them in terms of time, cost, and the number of people needed at a site, which reduces risk and improves construction safety,” Lu said. “That starts with industry collaborations to evaluate how well the sensors work.”

Over the last decade, general contractors have used traditional sensors to make reliable and accurate estimates of concrete strength and maturity. But before even pouring the concrete, the method requires a month-long process of testing the concrete mix design in the lab. A line graph is generated to note the strength of the mix design based on specific temperatures over time.

This line graph is then used to match up temperature measurements from sensors in the field. Strength values on the graph, called a “maturity curve,” help workers estimate when the concrete is strong enough to continue construction.

If unexpected weather or anything else calls for changing the mix’s main ingredients, a contractor has to generate a maturity curve all over again for the new mix.

The sensors developed by Lu’s lab would measure concrete strength directly from the floor deck in real time, eliminating the need for generating a maturity curve beforehand.

“These new sensors are more of a ‘plug and play.’ We could make judgment calls on the fly,” said Ryan Decker, Wilhelm’s corporate quality assurance manager.

Like commercial types, Lu’s sensors would remain in the concrete. The sensors provide a more direct measurement of strength by using electricity to send an acoustic wave through the concrete. How concrete responds to particular wave speeds indicates its strength and stiffness.

“A wave propagating through concrete can tell us a lot of information. We can find out not only how strong the concrete is, but also detailed information about the concrete’s microstructure,” Lu said.

Twelve of Lu’s sensors have been installed into various sections of the Gateway Complex’s third floor so that the teams can best understand how well they work compared with commercial sensors in use on the site.

Lu’s lab has validated the technology and is now developing a system that contractors could use to remotely receive the concrete’s strength information.

Endnotes:
  1. Purdue University: https://purdue.edu/
  2. F.A. Wilhelm Construction Co. Inc.: https://www.fawilhelm.com/
  3. [Image]: https://www.constructionspecifier.com/wp-content/uploads/2020/12/Opener-20.jpg
  4. highways across Indiana: https://www.purdue.edu/newsroom/releases/2019/Q3/science-to-reveal-how-long-highway-construction-should-actually-take.html

Source URL: https://www.constructioncanada.net/researchers-develop-sensors-to-test-concrete-strength-in-real-time/